A+ ABSORBENT APPLICATION
ON WATER:
1. Spread A+ in the opposite direction of the water’s current in order to form a barrier for the spill to flow towards.
2. A+ will change color to a black color after it has absorbed oil.
3. Once the oil is absorbed, use a fine mesh to remove it from the water.
ON LAND:
1. Spread A+ over the spill in a uniform manner.
Use a thin layer of A+ to cover the entire surface area of the spill.
With wind, keep the wind behind you, spread the product at about 6 inches above the spill.
2. A+ will change to a dark color after it has absorbed oil.
3. Once it has reached this state, remove it with a stiff broom and place in a proper container.
Leaks:
1. Apply A+ around the perimeter of a leak.
2. A+ can be used to solidify a hydrocarbons for safer shipping and storage.
DISPOSAL:
Contact local authorities for advice and instructions
Dispose according to laws and regulations at the spill location.